Brantho Korrux nitrofest in the 0.75 liter can
High-quality, non-slip, matt 1-component coating with rapid drying, high filling power, high corrosion protection, solvent-reduced, actively pigmented, high hardness. Primer and filler at the same time.
For iron and steel, also well proven on flash rust (stuck residual rust) and other substrates.
No nitro paint but even with nitro and 2-component
Varnishes can be painted over.
Brantho-Korrux "nitrofest" can be applied at any time with itself, after approx. 1-3 hours with 1-component or water-thinnable paints, and after approx. 24 hours with 2-component -Varnish can be painted over.
No intermediate sanding necessary.
B.-K. "nitrofest" penetrates rust film, encapsulates it and prevents further rusting.
Other colors (without yellow, orange, red) from 25 l.
Yellow-orange-red colors (RAL 1..., 2..., 3..., 4...) from 25 liters.
Productivity:
In terms of
figures, 1 liter is sufficient for one layer of 30 µm for 16.7 m². However, one coat enables a double layer thickness, the practical consumption is therefore approx. 0.15 liters. / m².
Special colors partly available from stock, partly within 3-5 days
PDF
| Item information |
Value |
| Shipping weight: |
1,20 kg
|
| Content: |
750,00 ml
|
Product safety information
Manufacturer information:
A.V.Branth KG
, Deutschland,
DE
AT
CH ▾
BE ▾
NL
FR
IT
ES
DK
PL
UK
USA
MX
INT
PT
SE
FI
CZ
HU
SK
RO
HR